Fenix HP30R v2.0 – 3000 Lumens
The HP30R V2.0 head torch from Fenix.
Fenix HP30R is designed for serious industrial and rescue use, It’s big, it’s bold, it’s ultra-powerful, controlled by a rotary switch with a center push button, and is fueled by 2 x high capacity 5000mAh Fenix 21700 batteries.
The main beam with 4 brightness levels of 50, 200, 800, and 2000 lumens and a reach of 270m sits between 2 x 500 lumen Neutral – White pure flood lights which deliver 50, 200, and 1000 lumens. Switch them all on to turn night into day with 3000 lumens of light!
With its large battery capacity, efficient, lightweight aluminum heat sink head, and industrial quality components, HP30R V2.0 can maintain extreme output for longer periods than a conventional boost mode whilst effectively dissipating the heat generated, leading to longer service life.
Fenix HP30R V2.0 is controlled by a large rotary switch. From the central off position, turning the switch clockwise activates the main beam, twisting further for increased brightness. Turning the switch counterclockwise activates the flood beam, twisting further for increased brightness. Pressing the center switch while the light is on will also activate the nonrunning beam for combined light up to 3000 lumens.
The heavy-duty battery pack features a double lock mechanism and contains 2 x 5000mAh batteries, easily exchanged for spares to keep the light shining. These are standard Fenix 21700 batteries rather than a dedicated pack, so spares can be purchased at a reasonable cost. The battery case incorporates a 4 x LED meter for charging and battery level indication, plus a USB-OUT socket for use as a 10,000 mAh power bank.
Main Beam:
The Fenix HP30R main 2000-lumen LED and reflector provide a balanced combination of far-reaching beam and area spill light, lighting near and far. Safe illumination for a multitude of tasks. This beam offers 4 output levels from 50 to 2000 lumens and punches out to an impressive 251 meters at maximum output.
* Low – 50 lumens (120 hours non dimming output) – 42m beam
* Med – 200 lumens (34 hours non dimming output) – 78m beam
* High – 800 lumens (12 hours non dimming output) – 156m beam
* Turbo – 2000 lumens max – 251m beam -10 to 15 minutes constant output at 2000 lumens! (output will dim to 1200 lm after 10 minutes to prevent overheating. Turbo output can be re-activated once the headlamp cools. Continuous (nonstop) run time is 6 hours.
Pure flood beam with no distracting hard edges:
The HP30R V2’s pure flood beam offers 3 output levels from 50 to 1000 lumens. From low-level light that lasts for days to a smooth, powerful close-in working beam with no hot spot, the flood light has you covered. Run times vary from a long-lasting 120-hour working light to an impressive 10-hour high-power floodlight!
* Low – 50 lumens (120 hours non dimming output) – 17m beam
* Med – 200 lumens (34 hours non dimming output) – 34m beam
* High – 1000 lumens (20 minutes approx, then 9 hrs 40 minutes at 800 lumens) – 78m beam
Combined beams:
Both beams run in combination for wide area and distance lighting combined.
* Low – 100 lumens (60 hours non dimming output) – 45m beam
* Med – 400 lumens (17 hours non dimming output) – 85m beam
* High – 1800 lumens (6 hours) – 177m beam
* Turbo – 3000 lumens (5 hours) – 270m beam
(All figures are taken from Fenix run time graph and may vary depending on ambient temperature and user-selected output variations)
Operation:
On/Off
With the lamp switched off, rotate the switch clockwise for spotlight mode or counterclockwise for floodlight mode.
With the lamp switched on, rotate the switch to the neutral position to turn off the lamp.
Mode switching:
From spotlight mode, rotate the switch counterclockwise past the off position to enter floodlight mode.
From floodlight mode, rotate the switch clockwise past the off position to enter spotlight mode.
Spot and Flood Mode:
From either spotlight or floodlight mode, click the button in the center of the rotary switch to enter spot and flood mode. Click again to re-enter single-beam mode.
Output selection:
Spotlight Mode:
Rotate the switch clockwise to cycle through Low – Med – High and Turbo levels.
Floodlight Mode:
Rotate the switch counterclockwise to cycle through Low – Med and High levels
Spot and Flood Mode:
Press the Fenix HP30R central switch in either spotlight or floodlight mode to enter combined mode. 4 combined outputs are available in Spotlight Mode and 3 in Floodlight Mode.
Fenix HP30R V2.0 headlamp other features:
Battery pack extension cable included for pocket or belt use (great to keep the batteries warm in cold weather)
- 4 helmet attachment clips included
- Reflective headband with anti-slip silicone strips
- 2m impact-resistant
- Overheat step down at 60c
- Weatherproof to IP66 (heavy rain and splashing)
- New upgraded model
- Rechargeable headlamp
- 4 brightness levels
- Features Cree XHP50 and XP-G3 LEDs
- Maximum of 3000 Lumens
- Beam up to 270 meters
- Pure white flood light
- 4 x LED meter for charging and battery level indication
- Contains 2 x 5000mAh batteries
- Overheat step down at 60c
- 2m impact-resistant
- Reflective headband with anti-slip silicone strips
- Battery pack extension cable included
- 4 helmet attachment clips included
- Weatherproof to IP66 (heavy rain and splashing)
